# Quick Answer: How Many Foot Candles Do I Need In A Workshop?

## Is 3000 lumens too bright?

In other words, 3,000 lumens is meant to give a room a brighter light.

This is not ideal if you have a small room and it’s a bedroom.

You don’t want to blind your eyes when you’re about to go to bed.

On the other hand, 2,000 lumens is ideal if you wish to light up a 200 square-foot living room..

## How many foot candles is bright indirect light?

1000-2000 foot candles1000-2000 foot candles of light are considered bright indirect light.

## How many foot candles do I need?

Public areas surrounded by dark areas will generally require 2 to 5 foot-candles, or 20 to 50 lux, while typical offices and classrooms without highly detailed work will need 10 to 20 foot-candles, or 200 lux.

## How many foot candles do I need for a parking lot?

The horizontal luminance shall have an average maintained one foot-candle with a minimum level of 0.25 foot-candle on the parking lot surface from dusk until termination of normal business hours.

## How many foot candles are in a 100 watt bulb?

400 foot candlesTheir efficiency is in the range of 4 lumens per watt. This means that a 100 watt bulb will generate 400 lumens – TOTAL. (Here’s the big leap) Now, if we COULD reflect all of that 400 lumens onto 1 square foot we would get a light intensity of 400 foot candles.

## How many lumens is a 30×40 shop?

30X40=1200sqft X 100 Lu = 120000 /2600 = 46 T8 32W tubes or 12 4 tube fixtures. 2600 lumens per 32W T8 tube is about average.

## How many lumens is 100 square feet?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## How many lumens do you need for a workshop?

Lighting fixtures and bulbs have labels that indicate lumens per device. A general rule of thumb is to use 130 to 150 lumens per square foot of work space. For example, a 40-watt fluorescent bulb puts out about 2,200 lumens. A 60-watt incandescent bulb puts out about 800 lumens.

## What’s the difference between lux and foot candles?

There is no difference between foot candles and lux in respect of what they measure. … The footcandle is an ‘imperial measurement’, while lux is a metric (or SI) measurement.

## How many candlepower is a 60 watt bulb?

Your average 60 watt household light bulb produces 650 to 700 lumens when burned under standardized conditions. Therefore you can estimate that a 60 watt household light bulb, burned under average household conditions might produce somewhere between 50 and 55 candle power, give or take…

## How much light is a foot candle?

A foot-candle equals one lumen per square foot. This is a British measurement. Using the metric system, a lumen is measured by a square meter or a lux. Thus a foot-candle is equivalent to approximately 10 lux or 10.57 lux.

## What does 5 foot candles mean?

Believe it or not, foot candles are the most common unit of measure used by lighting professionals to calculate light levels in businesses and outdoor spaces. In a nutshell, a foot candle is a measurement of light intensity and is defined as the illuminance on a one-square foot surface from a uniform source of light.

## How many foot candles does OSHA require?

5 footFoot-Candles in the OSHA Standards. In standard 29 CFR 1926.56(a), OSHA lists the minimum amount of light for operating zones encountered in the construction industry. For warehouses and similar indoor spaces, this standard requires illumination of at least 5 foot-candles.

## What does foot candle mean?

A foot-candle (or foot-candle, fc, lm/ft2, or ft-c) is a measurement of light intensity. One foot-candle is defined as enough light to saturate a one-foot square with one lumen of light.

## How many watts is a foot candle?

You can also calculate the number of watts directly from the foot-candles by combining both equations and using the following: Watts = Foot Candles x 0.01609696 This is because 10.76 x 0.001496 = 0.01609696).

## How bright is 40 foot candles?

In some areas, foot-candles will be higher than 40, and in other areas, it will be lower, but it will average out at 40. You’d need a fixture or multiple fixtures combined that will give you about 40 lumens of light per square foot.

## What kind of lights are in parking lots?

Most parking lot lights utilize one of three types of lamps: high intensity discharge (HID) lamps such as metal halide, high pressure sodium, and – if they are very old – mercury vapor lamps.

## How many foot candles do I need in an office?

20 foot candlesOffices and Indoor Spaces A requirement of 20 foot candles is recommended for general spaces in offices. In areas where reading and detailed tasks are carried out, 50 foot candles of lighting is sufficient.