Can I Replace A 1hp Pool Pump With A 1.5 HP?

Does pool pump use a lot of electricity?

Pool pumps use up to 2,500 kWh per year to circulate and filter the water.

The average monthly costs for a 1 HP pump running 8 hours per day in Florida is approximately $30*..

What is the best 1.5 HP pool pump?

Selecting the Best Variable Speed Pool Pumps in January, 2021NameHorsepowerVolts(Editor’s Choice) Hayward SP2610X151.5 HP220(Editor’s Choice) Pentair 011018 IntelliFlo3 HP230Hayward SP3400VSP3 HP230Hayward SP2302VSP1 1/2 HP2306 more rows•Jun 3, 2020

How much does it cost to run a 1.5 HP pool pump?

$1.36 per day x 365 days = $496 per year to Operate a 1-½ HP Variable Speed Pump. Cost to Operate 1-½ HP Single Speed Pool Pump $1,062 / yr Vs. Cost of Variable Speed Pump $496 / year.

How much HP pool pump do I need?

According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM). Since we always go for the higher GPM, we would select the 1 HP pump.

How many hours should my pool pump run?

8 hoursEvery pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day.

How strong of a pool pump do I need?

That being said, it’s important to know that pool pumps should really be rated by the gallons per minute of water flow instead of the motor’s HP. What you’re looking for is a pump that will be able to pump all the water in your pool through the filter in no more than 8-10 hours.

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

How much does it cost for a new pool pump?

The average cost to install a pool water pump ranges from $700-$1,500, with the average homeowner spending around $950 to install a dual-speed pump….Pool Water Pump Installation Cost.Pool water pump installation costsNational average cost$950Average range$700 – $1,500Minimum cost$500Maximum cost$2,400May 28, 2020

Is it better to run a pool pump at night or day?

Running your pool pump during the day is good because that’s when the sun is out. UV rays are eating up the chlorine, so it is good to have the pump running to counteract the sun’s effects. A pro for night time would be that it’s off-peak utility hours. It’s cheaper to run the pool pump at night.

What size pool pump do I need for a 25000 gallon pool?

Your 25,000-gallon pool needs an output of 52 gallons per minute to circulate the water once every eight hours. The size of your pool’s pipes determines the maximum flow rate.

Do I need a 2 speed pool pump?

At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.

How many amps does a 1.5 HP pool pump use?

It’s not uncommon for a 1.5 horsepower pump to use 1500 – 2000 watts. This is unfortunate, because most pools only need 1/4 to 1/8th horsepower for circulation. Higher power may be needed for tasks like vacuuming the pool….How many amps does a pool pump use?HorsepowerAmpsVoltage1.25 HP8.63 A120 V1.5 HP10.4 A120 V2 more rows•Jun 3, 2020

Can I replace my pool pump with a bigger one?

If you are building a new pool, you have the option to go with pretty much whatever horsepower pump you want as long as it meets the minimum requirements of your pool and is properly sized for the filter and plumbing.

How many amps does a 1.5 hp motor?

Common Horsepower to Amps ConversionsHorsepowerAmpsVoltage1.5 HP10.4 A120 V1.75 HP12.1 A120 V2 HP13.8 A120 V2.5 HP17.3 A120 V11 more rows

How many gallons per minute does a 1.5 HP pool pump?

42 gallonsFor each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).